Rent 1 input, 4 output mono distribution amplifier used to route sound from a mixer to multiple interpreter control consoles or as a press box

//-->

		San Antonio & international: 210-545-0019
		US & Canada toll free : 800-909-0093
		Email: info@barinas.com
		Free shipping

Distribution amplifiers for rent

305 Symetrix 4 Channel Distribution Amplifier
	A one input, four output mono distribution amplifier used to route sound from a mixer to multiple interpreter control consoles. Can also be used as a press box to route sound to multiple broadcast devices. Use the 305 to route your most critical audio to four separate outputs. Sound contractors will find the 305 essential for feeding multiple power amps. Manual (PDF) Data Sheet (PDF) Flow Chart (PDF)
Specifications
The Symetrix 305 Distribution Amplifier shall be a one channel audio distribution amplifier consisting of one electronically balanced input amplifier and four electronically balanced output amplifiers. There shall be a master gain adjustment circuit capable of up to 15dB of gain or 15dB of loss for the purpose of optimally matching incoming signal level(s). There shall be a four-LED array for the indication of the signal level applied to the output drive circuits. The LEDs shall be labelled CLIP, +10, 0, and -10 corresponding to internal signal levels of +18dBu, +10dBu, 0dBu, and -10dBu. The output shall be capable of driving a 600- ohm balanced load to a level of +22 dBu. The maximum output level into a balanced bridging load (20K Ohms) shall be +26 dBu. The output will offer an individual attenuator with a range of 0 to -20 dB. Frequency response through the amplifier shall be �1/2 dB, measured between 20 Hz and 20 kHz. THD+Noise shall be less than 0.009% measured at +26dBu with a band- width of 30 kHz. Residual noise will be >100 dB below a +4 dBu input signal when measured with an A-weighting filter. The unit shall occupy half of the width of one rack space. The physical dimensions shall be 1.75"H x 8.5"W x 6.5"D; 4.445cm H x 21.59cm W x 15.875cm D. The distribution amplifier shall operate by means of a Symetrix PS-3 or PS-3E power supply connected to 117V AC nominal, (95-130V AC), 50-60 Hz or 230V AC nominal, (165-255V AC), 50 Hz.

Delivering superior quality since 1980. Call 1-800-909-0093 for a free custom system design by our expert staff.

FREE SHIPPING ON US PURCHASES* LOWEST PRICE GUARANTEE ON SALES & RENTALS*

*Click here for details on free shipping and lowest-price guarantee on all equipment sales and rentals

Free shipping on

Copyright © 1985-2008 Barinas Translation Consultants, Inc.- 800 Hop Tree, San Antonio,Texas 78260-6814